|
Accént Low Voltage track
system is a tried and tested means of providing ultimate flexibility to
your lighting design.
Track allows for continual change by letting you adjust the position and
direction of light beam as often or as little as you like. Track can be
mounted on solid ceilings to overcome cabling difficulties, or
alternatively on side walls, hidden application or on the floor of a
window to uplight displays.
Special track accessories for track allow extra lighting accents where you
want them- curved connectors cope with corners, suspension sets drop the
track below high ceilings, and connectors provide for extra length. |
|
|
- Each circuit of track, regardless of length, can carry 25 amps of
loading, which allows a maximum load of five 50 watt 12 volt dichroic
lamps (Subject to correct transformer selection).
- All track and accessories comes as standard in white or black
finish. Chrome and Brass are available to special order.
- Accepts all Accént low voltage spotlights.
|
|
 
|
- TK1 One Metre Track
- TK2 Two Metre Track
CTK1 1 metre curved track
|
|
|
- A Live end connects the low voltage power into the track system and
is therefore essential for each circuit to connect to its transformer.
- The dead end provides a suitable termination to the live circuit and
blank end to the opposite end of the track.
- LE Live End
- DED Dead End
|
|
|
- Each spotlight fitted to the track must have a track adaptor.
- ADAP Track Adaptor
|
|
|
- An optional accessory which provides an opportunity to suspend track
by wire up to 2 metres below a high ceiling.
- SUS- Suspension Kit
|
|
|
- An optional accessory that provides the ability for your track
design to go around corners by means of a 90-degree connection.
- CCON - Curved Connector
|
|
|
- An optional accessory to electrically join two lengths of track with
a straight joint.
- CPL- Electrical Coupler
|
|
|
- An optional accessory to mechanically join two lengths of track with
a straight joint. This can leave the two tracks abutted but as
separate electrical circuits.
- The mechanical coupler is often used in series with an electrical
coupler to provide extra security to the connection joint.
- PCPL- Plastic Mechanical Coupler
- ACPL- Aluminium Mechanical Coupler
|
|
|
- CEN Central Feed power supply
|
|
|
|
|
|
Transformer 105 va
*E250 Transformer 250 va *Plugs in to the
end of track
Remote transformers available
|
